Filter
Top Products
135
Shooting Functions
4
The Shake Reduction function operates by obtaining the lens information
such as focal length.
If the camera uses a DA, DA L, D FA, FA J, FA or F lens, the lens
information is automatically obtained when the Shake Reduction function
is activated.
The [Input Focal Length] setting screen appears when the camera is
turned on with [Shake Reduction] set to k (On) and a type of lens that
does not support automatic obtaining the lens information such as focal
length (p.292) is mounted.
Set the focal length manually in the [Input Focal Length] setting screen.
1
Use the four-way controller (45)
or the rear e-dial (S ) to set the
focal length.
Select from the following 34 focal length
values. (The default setting is [35].)
2
Press the 4 button.
The camera returns to the status screen and is ready to take a picture.
When the Focal Length Cannot Be Automatically Detected
• The [Input Focal Length] setting screen does not appear when using a lens
that supports automatic obtaining the lens information such as focal length.
• When using a lens without the s position on the aperture or with the aperture
set to a position other than the s position, set [37. Using Aperture Ring] in
the [A Custom Setting 6] menu to [Permitted]. (p.294)
8 101215182024283035
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
• If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
• When using a zoom lens, select the actual focal length at the zoom setting in
the same manner.
Cancel
MENU
Input Focal Length
135
120
100
OK
OK