Filter
Top Products
200
Shooting Settings
6
Enables the capture of images at high dynamic range. Takes three frames
(underexposed, standard (proper exposure) and overexposed) to create a
single composite image with them.
1
Select [HDR Capture] in the [A Rec. Mode 2] menu and
press the four-way controller (5).
2
Use the four-way controller (23)
to select [Off], [Standard], or
[Strong].
3
Press the 4 button.
4
Press the 3 button.
The camera is ready to take a picture.
When [Highlight Correction] is set to [O] (On), the minimum sensitivity is ISO
200.
HDR Capture
• When HDR Capture is set, the file format is always set to [JPEG] and cannot
be changed. You cannot use HDR Capture when the file format is set to
[RAW].
• When HDR Capture is set, Interval Shooting and Multi-exposure are not
available. Also, the drive modes other than 9 (Single Frame Shooting) and
h (Remote Control) are not available.
• HDR Capture, Extended Bracketing and Digital Filter cannot be used at the
same time. The mode set last is used.
• HDR Capture is not available when the exposure mode is set to p (Bulb) or
M (Flash X-sync Speed) mode.
• During HDR Capture, multiple frames are combined together to create a
single image, so it takes time to save an image.
• During HDR Capture, pressing the 3 button while an image is being
saved cancels the process and saves the image as a standard image.
• [Shake Reduction] is automatically set to l (Off) when HDR Capture is
set. In this case, use a tripod to prevent camera shake.
Program Line
Extended Bracketing
HDR Capture
Digital Filter
Multi-exposure
Interval Shooting
Composition Adjust.
Cancel
MENU
1 2
3
4
OFF
OFF
OK
OK
Off
Standard
Strong