Pentax K-7 Camcorder User Manual


 
46
Getting Started
2
You can confirm remaining battery level by checking the
w/A
displayed on the status screen and LCD panel.
The picture storage capacity (flash use 50%) is based on measuring conditions in
accordance with CIPA standards and the others are based on our measuring
conditions. Some deviation from the above figures may occur in actual use
depending on shooting mode and shooting conditions.
Battery Level Indicator
Status screen LCD panel Battery level
w (Green) A Battery is full.
x (Green) B Battery is close to full.
y (Yellow) C Battery is running low.
z (Red) D lit Battery is almost empty.
“Battery depleted” D blinks
The camera turns off after displaying the
message. (D continues blinking on the
LCD panel.)
y, z (red), C or D may appear even when the battery level is
sufficient if the camera is used at low temperatures or when performing
continuous shooting consecutively. In this sort of case, turn the camera off
and on again. If w or A appears, you can use the camera.
w and A are not displayed when using the AC adapter.
Approximate Image Storage Capacity and
Playback Time (Battery Fully Charged)
Battery
Normal
recording
Flash photography
Playback time
(Temperature)
50% use 100% use
D-LI90 (23°C) 980 740 610 440 minutes
( 0°C) 810 680 560 400 minutes