Filter
Top Products
306
Appendix
10
Not enough battery
power remaining to
activate Pixel Mapping
Appears during pixel mapping if the battery level is
insufficient. Replace the battery with a fully
charged one or use an AC adaptor kit K-AC50
(optional). (p.47)
Image folder cannot be
created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.256)
Unable to store image
The image could not be saved because of an SD
Memory Card error.
Settings not stored
The DPOF settings or rotation information could
not be saved because SD Memory Card is full.
Delete unwanted images and perform DPOF
settings or rotation again. (p.79)
The operation could not be
completed correctly
The camera was unable to measure the manual
white balance or detect dust on the sensor. Try the
operation again. (p.194, p.296)
No more images can be
selected
You cannot select 100 or more images at a time for
Index (p.219), Select & Delete (p.227) and
Developing Selected Images (p.248).
This image cannot be
processed
Appears when Save as Manual WB (p.198),
Resize (p.238), Cropping (p.239), Digital Filter
(p.241), or RAW Development (p.247) is started
for images captured with other cameras, or when
Resize or Cropping is started for minimum size
images.
The camera failed to create
an image
The creation of an index print image failed. (p.219)
Camera overheated.
Disabling Live View
temporarily
to protect circuitry
Live View cannot be used because the camera’s
internal temperature is too high. Press the 4
button and try using Live View again when the
camera has cooled down.
This function is
not available in
the current mode
You are trying to set a function that is not available
in B (Green) or C (Movie) mode.
Error Message Description