Filter
Top Products
111
Shooting Functions
4
• Set the aperture value in increments of 1/3 EV or 1/2 EV. Set the exposure
steps in [1. EV Steps] in the [A Custom Setting 1] menu. (p.116)
• The Shake Reduction function is automatically disabled when the exposure
mode is set to p mode.
• Use a sturdy tripod and the cable switch CS-205 (optional) or Remote Control
F (optional) to prevent camera shake when using p mode. Connect the cable
switch to the cable release terminal (p.17).
• To operate the shutter release button of the remote control, set in [17.
Remote Control in Bulb] in the [A Custom Setting 3] menu (p.86).
• When the sensitivity is set to [AUTO] and the exposure mode is set to p
mode, the sensitivity is the lowest sensitivity set in “Setting the Range of
Automatic Sensitivity Correction” (p.90).
• When the exposure mode is set to p, the upper sensitivity limit is ISO 1600.
• There is no limit on exposure time for Bulb shooting. However, we
recommend using the AC adapter kit K-AC50 (optional) when shooting with
a long exposure setting as the battery is used while the shutter remains open.
(p.47)
e-dial in p & M modes
You can set the functions of the front and rear e-dials in p and M
modes. Set in [27. e-dial in B & X modes] in the [A Custom Setting 4]
menu (p.86).
Settings Front e-dial (R) Rear e-dial (S)
1 – (Not Available) c (Aperture)
2 c (Aperture) – (Not Available)
3 Sensitivity c (Aperture)
4 c (Aperture) Sensitivity