Filter
Top Products
34
Before Using Your Camera
1
How to Change Function Settings
Function settings can be changed using the direct keys, the control panel or
the menu. Some functions can be changed using both the control panel and
menu.
This section explains the basic ways to change function settings.
By pressing the four-way controller (2345) in Capture mode you can
set [Drive Mode], [Flash Mode], [White Balance] and [Custom Image].
(p.82)
Below, how to set to the flash mode will be explained as an example.
1
Press the four-way controller (3)
in Capture mode.
The [Flash Mode] screen appears.
2
Use the four-way controller (45)
to select a flash mode.
3
Press the 4 button.
The camera is ready to take a picture.
Using the Direct Keys
Flash Mode
Flash On
Cancel
MENU
0.0
OK
OK