Filter
Top Products
225
Playback Functions
7
Rotating Images
When pictures are taken with Q held vertically, the vertical position
sensor activates and rotation information is added to the image to enable
playback with the correct image orientation. You can change the rotation
information and save the image using the following procedure.
1
Select the image you want to rotate in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select s (Image
Rotation) and press the 4 button.
The selected image is rotated in 90° increments and the four thumbnail
images are displayed.
4
Use the four-way controller
(2345) to select the rotation
direction and press the 4
button.
The image rotation information is saved.
• The rotation information is not added when [33. Saving Rotation Info] in the
[A Custom Setting 5] menu (p.87) is set to [Off].
• During playback, the image is automatically rotated based on the rotation
information when [34. Auto Image Rotation] in the [A Custom Setting 5]
menu (p.87) is set to [On].
Rotation information cannot be changed for the following cases.
- Protected images
- Images without rotation information
- When [34. Auto Image Rotation] in the [A Custom Setting 5] menu (p.87)
is set to [Off]
Images with rotation information are displayed according to the orientation of
the camera.
MENU
OK
OK
Cancel