Filter
Top Products
177
Using the Flash
5
Set the camera to wireless flash mode when using an external flash in
combination with the built-in flash.
1
Press the four-way controller (3).
The [Flash Mode] screen appears.
2
Select r and press the 4
button.
The camera is ready to take a picture.
Using the Built-in Flash Wirelessly
• r cannot be set when the exposure mode is set to B (Green).
• When the drive mode is set to i (Remote Control (3s delay)), d (Mirror
lock-up) or e (Mirror lock-up remote control), or the lens aperture is not set
to the s position, r cannot be selected.
Flash Mode
Wireless Mode
Cancel OK
OK
MENU
0.0
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method in wireless mode.
Set in [31. Flash in Wireless Mode] in the [A Custom Setting 5] menu
(p.87).
1 On Discharges the built-in flash as a master. (Default setting)
2 Off Discharges the built-in flash as a control flash.
HSb (High-speed flash sync) is not available with the built-in flash.