Filter
Top Products
202
Shooting Settings
6
1
Select [Lens Correction] in the [A Rec. Mode 1] menu and
press the four-way controller (5).
The [Lens Correction] screen appears.
2
Use the four-way controller (23) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj].
3
Use the four-way controller (45)
to select O or P.
4
Press the 3 button twice.
The camera is ready to take a picture.
• Corrections can only be made when using a DA, DA L or D FA lens. [Lens
Correction] cannot be selected when an incompatible lens is attached.
• [Distortion Correction] is disabled when using a DA FISH-EYE 10-17mm.
• The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached between the camera and the
lens.
• The shooting speed for continuous shooting may be slower when [Lens
Correction] is set to O (On).
• The effects of Lens Correction function may be barely noticeable in some
cases due to the shooting conditions or other factors.
When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select on or off when developing RAW images. (p.250)
Lens Correction
Distortion Correction
Lat-Chromatic-Ab Adj
MENU