Filter
Top Products
108
Shooting Functions
4
Set the aperture value for controlling the depth of field. The depth of field
is deeper and the front and back of the focused object is clear when the
aperture is set to a large value, a small lens opening. The depth of field is
shallower and the front and back of the focused object is blurred when the
aperture is set to a small value, large lens opening.
The shutter speed is automatically set to the proper exposure depending
on the aperture value.
1Effect of Aperture and Shutter Speed (p.96)
1
Set the mode dial to c.
• Turn the e-dial while pressing the mc button to change the EV
compensation value. (p.117)
• The shutter speed can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [A Custom Setting 1] menu. (p.118)
• The proper exposure may not be obtained with the selected shutter speed
when the sensitivity is set to [Fixed Value] (
p.98
).
Using the c (Aperture Priority) Mode
Exposure Warning
If the subject is too bright or too dark,
the aperture value will blink in the status
screen and viewfinder. If the subject is
too bright, choose a faster shutter
speed. If it is too dark, choose a slower shutter speed. When the
aperture value indication stops blinking, you can take a picture with
proper exposure.
Use a commercially available ND (Neutral Density) Filter if the subject
is too bright. Use a flash if it is too dark.