Filter
Top Products
163
Shooting Functions
4
* Indicator 11 (Phase Difference AF frame) is displayed in white during
Live View. When the subject is in focus, a green square frame is
displayed instead. It turns red when the subject is not in focus. It is not
displayed when the focus mode is set to \.
* When 15, 16, and 18 can be changed, 5 appears next to the set value.
* Indicators 20 and 21 are displayed when [Autofocus Method] is set to
I and the camera detects person’s face(s). (Up to 16 face recognition
frames are displayed on the monitor.)
Available operations
3
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject
is clearly visible on the focusing screen.
4
Press the shutter release button fully.
The picture is taken.
12 EV Compensation 18 Sensitivity
13 Histogram 19
Remaining image storage capacity
14 AE Lock 20 Main face detection frame (Face
Detection AF)
15 Shutter speed
16 Aperture value 21 Face detection frame (Face
Detection AF)
17 EV bar
4 button When the focusing area is set to S (Select) and
[Autofocus Method] is set to i or S, press this button
to disable direct key operation of the four-way controller
(2345) and enable changing the AF point.
Four-way
controller
(2345)
Changes the AF point when the AF point can be changed.
Press the 4 button to return AF point to the center of the
AF frame.
Press and hold
4 button
Disables changing the AF point and enables direct key
operation of the four-way controller (2345).
M button
Enlarges the image to 2, 4, or 6 times (when the focus mode is
set to
\
, enlarges the image to 2, 4, 6, 8, or 10 times). Use
the four-way controller (
2345
) to move the display area,
and press the
|
button to return the display area to the center.
(Available only when [Green Button] is assigned to the
|
button in [Green Button] of the [
A
Rec. Mode 4] menu (p.197).)