Filter
Top Products
168
Shooting Functions
4
2
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject
is clearly visible on the focusing screen.
3
Press the shutter release button fully.
Recording of the movie starts.
4
Press the shutter release button again.
Recording stops.
Press and hold 4
button
Disables changing the AF point and enables direct
key operation of the four-way controller (
2345
).
M button Enlarges the image to 2, 4, or 6 times (when the
focus mode is set to \, enlarges the image to 2, 4,
6, 8, or 10 times). Use the four-way controller
(2345) to move the display area.
• When [Sound] is set to g (On), the camera operation sounds are also
recorded. When recording a movie, mount the camera onto a tripod and do
not operate the camera while recording.
• When recording a movie, regardless of the AF mode setting, recording starts
when the shutter release button is pressed fully even if the subject is not in
focus.
• While recording a movie, the autofocus system does not operate.
• The flash is not available.
• When recording movies using image processing, such as Digital Filter, some
frames may be omitted from the recorded movie.
• If the internal temperature of the camera becomes high during movie
recording, the recording may be terminated to protect the camera circuitry.
• You can record movies continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full, recording stops and the movie is saved.
• Live View image in C mode is displayed according to the [Live View] setting
(p.160) made in the [A Rec. Mode 3] menu. However, the histogram and
Bright/Dark Area warning are not displayed during movie recording.
• If you intend to shoot continuously for a long period, use of the AC adapter
kit K-AC109 (optional) is recommended. (p.50)
• You can also use the optional remote control to record a movie. (p.147)
• EV compensation is also available during movie recording.
• The sensitivity is fixed to [AUTO].