Filter
Top Products
282
Changing Additional Settings
9
Sets the type of AA batteries used in the camera. The default setting is
[Auto-detect].
1
Select [AA Battery Type] in the [R Set-up 3] menu and
press the four-way controller (5).
The [AA Battery Type] screen appears.
2
Use the four-way controller (23)
to select a battery type and press
the 4 button.
When set to [Auto-detect], the camera will
automatically detect the type of batteries
being used.
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Setting the Battery Type
When the type of batteries being used is different from the item you selected,
the battery level will not be correctly determined. Make sure that the correct
battery type is selected in the [AA Battery Type] setting. Usually, there is no
problem using [Auto-detect]. However in low temperatures and when using
batteries that were stored for long periods of time, set the appropriate battery
type so the camera can correctly determine the remaining battery level.
Auto Power Off 1min.
MENU
123 4
AUTO
Cancel OK
OK
AA Battery Type
Auto-detect
Nickel-Metal Hydride
Alkaline
Lithium
AUTO
AUTO
Ni-MH
AL
Li