Filter
Top Products
8
1. Remove the plastic cover, then plug the flat end of the
Travel Charger into the Power/Accessory Interface
connector and the other end into a standard AC wall
outlet.
2. When charging is finished, remove the flat end from
the interface connector jack on the camera.
Important!
If your handset has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger. Using excessive
force or a metallic object when pressing on the
touch screen may damage the tempered glass
surface and void the warranty. For more
information, refer to “Standard Limited Warranty”
on page 156.
Note:
Failure to unplug the wall charger before you remove the
battery, can cause damage to the camera.
Low Battery Indicator
When the battery is weak, the battery icon ( ) blinks and
the device sounds a warning tone at regular intervals. In this
condition, your camera conserves its remaining battery
power, not by turning off the backlight, but by entering the
dimming mode. For a quick check of your battery level,
glance at the battery charge indicator located in the upper-
right corner of your device’s display. Solid color ( )
indicates a full charge.