Filter
Top Products
English _99
USB
Message Icon Informs that... Action
Fail Printer Connecting -
A problem occurred when connecting
the camcorder via USB to a printer.
• Check the USB cable.
• Try the connecting procedure again.
• Switch “USB connect” function to “Mass Storage.”
Fail USB Connecting -
A problem occurred when connecting
the camcorder via USB to a PC.
• Check the USB cable.
• Try the connecting procedure again.
• Switch “USB connect” function to “PicBridge.”
Ink Error -
There is a problem with the ink
cartridge.
• Check the ink cartridge.
• Put a new ink cartridge in the printer.
Paper Error - There is a problem with the paper.
• Check the paper in the printer. If there is no paper,
insert the paper.
File Error - There is a problem with the file.
• Your HD camcorder does not support this file format.
• Try another file recorded on your HD camcorder
Printer Error - There is a problem with the printer.
• Turn the printer’s power off and on.
• Contact the printer manufacturer’s service centre.
Print Error - A problem occurred during printing.
• Do not remove power source or eject memory card
during printing.
CAUTION
When there is dew condensation, put the camcorder aside for a while before using
• What is dew condensation?
Dew condensation happens when a HD camcorder is moved to a place where there is a significant temperature difference from the
previous place. The Dew condenses on the external or internal lenses of the HD camcorder, and on the reflection lens. When this
happens, it may cause a malfunction or damage to the HD camcorder when using the device with the power on while there is dew
condensation.
• What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.
• When does the dew condensation occur?
When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area
suddenly, it will cause condensation.
- When recording outside in cold weather during the winter and then using it indoors.
- When recording outside in hot weather after being indoors or inside a car where the A/C was running.
Note before sending your camcorder for repair.
• If these instructions do not solve your problem, contact your nearest Samsung authorised service centre.
• Depending on the problem, the built-in memory may need to be initialised or replaced and the data will be deleted.
Be sure to back up the data on your PC before sending your camcorder for repair.
Samsung cannot guarantee any loss of your data.