Filter
Top Products
84_ English
PictBridge menu
Setting the date/time imprint option
Touch Menu ( ) tab
“Date/Time”
“Off,” “Date,” “Time,” or “Date & Time”
Return (
) tab.
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting.
page 82
• If the printer is not recognised, or to print again after direct printing with a
PictBridge printer, remove the USB cable, select “PictBridge” in the menu
again, and then reconnect the cable.
• If the “USB Connect” menu is set to “Mass Storage” you cannot connect
a PictBridge compatible printer to the camcorder and a “Fail USB
Connecting” message will appear. You must touch the “Switch Mode”
tab
“PictBridge” tab on the screen, and the “Connecting as Printer
Mode” message will appear.
• In some instances the HD camcorder may not connect to the printer. If
connection fails, disconnect the USB cable and turn off the printer and
back on. Then, connect the USB cable and set the HD camcorder to
“PictBridge.”
• The date/time option may not be supported by all printers. Check with
your printer manufacturer. The “Date/Time” menu cannot be set up if the
printer does not support this option.
• PictBridge™ is a registered trademark of CIPA (Camera & Imaging
Products Association), an image transfer standard developed by Canon,
Fuji, HP, Olympus, Seiko Epson, and Sony.
• Use the USB cable provided with the HD camcorder.
• Use the AC power adaptor for your HD camcorder during PictBridge
direct printing. Turning your HD camcorder off during printing might
damage data on the storage media.
• Movie images are not available for printing.
• You can set various printing options depending on the printer. Please refer
to the user manual of the printer for details.
• Do not remove USB cable or memory card during printing.
• You may not print photo images recorded on other devices.
printing photo images
” you cannot connect
1 / 1
Off
Date
Time
Date & Time
Date/Time
” in the menu
1 / 1
Date/Time