Filter
Top Products
104_ English
troubleshooting
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust automatically.
• Set “
Focus” to “Auto.”
page 56
• The recording conditions are not suitable for auto focus. Adjust the
focus manually.
page 57
• The lens is dusty on the surface. Clear the lens and check the focus.
• Recording is being made in a dark location. Use a light to brighten the
area.
The image appears too bright or
flickering, or changes in colour.
• This may occur when you make a recording under a fluorescent sodium,
or mercury lamp. Cancel “Scene Mode (AE)” to avoid or minimise this
phenomenon.
page 52
Image’s colour balance is not natural.
• White balance adjustment is required. Adjust to the proper “
White
Balance.”
page 53
The subject passing by the frame
very quickly appears to bend.
• This is called the focal plane phenomenon. This is not a malfunction.
Because of the way the image device (CMOS sensor) reads out video
signals, the subject passing by the frame rapidly may appear to bend,
depending on the recording condition.
Playback on your HD camcorder
Symptom Explanation/Solution
Using the playback (Play/Pause)
function does not start playing.
• Image files recorded using another device may not be played on your
HD camcorder.
• Check out the memory card compatibility.
page 29