Samsung VP-HMX10 Camcorder User Manual


 
English _25
Setting the date and time
Set the date and time when using this HD camcorder for the first time.
1. Touch the Menu ( ) tab.
2. Touch the Settings ( ) tab.
3. Touch the up ( )/down ( ) tab until “Date/Time Set” is displayed.
4. Touch “Date/Time Set.
5. Touch the up ( )/down ( ) tab to set current day, then touch month field.
6. Set values for month, year, hour, and minute as in setting the day.
7. Touch the OK (
OK
) tab when the date and time setting is completed.
The message “Date/Time Changed” appears, the set date/time is applied.
8. To exit, Return ( ) tab repeatedly until menu disappears.
On charging the built-in rechargeable battery
Your camcorder has a built-in rechargeable battery to retain the
date, time, and other settings even when the power is off. The built-
in rechargeable battery is always charged while your camcorder
is connected to the wall outlet via the AC power adaptor or while
the battery pack is attached. The rechargeable battery will be fully
discharged in about 6 months if you do not use your camcorder at all.
Use your camcorder after charging the built-in rechargeable battery.
If the built-in rechargeable battery is not charged, any input data will
not be backed up and the date/time appears on the screen as “01/
JAN/2007 00:00” (when “Date/Time” display is set to On).
You can set the year up to 2037.
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the
date/time display mode.
page 66
STBY 00:00:00 [44Min]
80
Min
Date/Time Set
Date/Time
File No.
LCD Control
1 / 5
OK
Date/Time Set
01
00
JAN
00
2007