Sony BRC-300P Camcorder User Manual


 
16
Location and Function of Parts
5.1.3 BRC-Z330
Rear
1
DC IN 12V connector
VISCA RS-422 connector
IR SELECT switch
Select the camera number when you operate
multiple cameras with the same Remote
Commander Unit.
Remote sensor
This is the sensor for the supplied Remote
Commander Unit.
DATA MIX switch
Set the switch to ON to overlap the menu with
the video signal output from the installed
interface board. Set it to OFF not to overlap the
menu.
75-ohm termination switch
This switch is used when an external sync signal
is used. Set it to OFF when this camera is in the
middle of a daisy chain connection of multiple
cameras. Set it to ON when the camera is at the
end of a daisy chain connection or when
nothing is connected to the EXT SYNC IN
connector on the camera.
EXT SYNC IN connector
VISCA RS-232C IN connector
Connect to the RM-BR300 Remote Control Unit.
When you connect multiple cameras, connect
it to the VISCA RS-232C OUT connector of the
previous camera in the daisy chain
connection.
VISCA RS-232C OUT connector
When you connect multiple cameras, connect
it to the VISCA RS-232C IN connector of the next
camera in the daisy chain connection.
S VIDEO connector
T VIDEO connector
Card slot
RGB/COMPONENT connector
2
3
4
5
6
7
8
9
10
Bottom
Ceiling bracket mounting screw holes
* The BRC-Z330 has one Tripod screw hole unlike other
BRC cameras.
Tripod screw hole (1/4-20UNC)
BOTTOM switches
14
Setting of the BOTTOM switches
Switch 1 (59.94/50 signal format selector)
Set to ON for output in 1080/50i (720/50P)
signal format, OFF for output in 1080/59.94i
(720/ 59.94P) signal format.
Switch 2 (1080i/720p signal format selector)
Set to ON for output in 720p signal format, OFF
for output in 1080i signal format.
Switch 3 (
RS-232C/RS-422 selector
)
Set to ON for RS-422, or OFF for RS-232C.
Switch 4 (Communication baud rate selector)
Set to ON for 38400 bps, or OFF for 9600 bps.
1
2
3
4
Pin No. Signal Pin No. Signal
1 Pr/R 9 NC
2 Y/G 10 GND
3 Pb/B 11 GND
4 GND 12 NC
5 GND 13 HD-OUT
6 GND 14 Tri-level Sync/Bi-level VD
7 GND 15 NC
8 GND
15
16
1 2 3 4 5 6 7
8 9 10 11 12 13
12
13
11
14 15 16
1
2
3
4
5
6
7
O
N
1
2
3
4
5
6
7
8
9
10
1
B