Filter
Top Products
25
Remote Operation
7.2 RM-BR300 Remote Control Unit
7.2.1
Features
Improvement of joystick operation
(BRC-H700/BRC-Z700/BRC-Z330/BRC-300/300P)
The pan/tilt speed can be adjusted in seven
levels by inclining the joystick to its maximum
angle, and pan/tilt operation can be
controlled easily at low speed. Only the
maximum pan/tilt speed can be set with the
previous version.
To select a speed level, hold down the SHIFT
button and PAN/TILT RESET button at the same
time for a few seconds, and the CAMERA switch
lamp on the RM-BR300 starts to flash. Select
between 1 and 7: 1 for the lowest speed and 7
is for the highest speed.
Addition of Bright Volume Control mode
(BRC-H700/BRC-Z700/BRC-Z330)
Iris can be controlled independently in Bright
Volume Control mode, selected with a DIP
Switch(3) on the bottom of the RM-BR300/4. Iris
and Gain can be adjusted in combination with
the previous version of the RM-BR300.
Improved Pan/Tilt joystick operation
(BRC-Z700/BRC-Z330)
• Shortens the time lag of the Pan/Tilt joystick.
• Enables ne direction control by the Pan/Tilt
joystick.
Improved AF operation
(BRC-Z700/BRC-Z330)
While one object is in focus, you can get the
next object (Far/Near) into focus by adjusting
the Focus Volume (Far/Near), when AF and AF
Assist are set to ON.
Improved Color Shift operation
(BRC-Z700/BRC-Z330)
R and B can be adjusted separately with R/B
Gain Volume when in AWB mode.
Improved Focus Volume operation
(BRC-Z700/BRC-Z330)
You can adjust to focus another subject in a
forward or backward location with the FOCUS
control when AF MODE is AUTO and AF ASSIST is
on.
In addition to the features mentioned in 7.2.1, the
following features are now available.
Effective control of up to seven
cameras
The RM-BR300 Remote Control Unit achieves
remote operation of up to seven cameras in a
daisy-chain configuration, allowing only one
operator to manage multiple camera systems.
Various Camera Presets
Various camera settings can be adjusted within
the menu. The BRC-H700/BRC-Z700/BRC-Z330
have sixteen presets each and the BRC-
300/300P has six presets to which pre-defined
P/T/Z positions and other various camera
settings can be allocated.
RS-232C/RS-422 Interface
RS-422 cables as well as a supplied RS-232C
cable are available to connect the camera to
an optical multiplex unit for long-distance
operation.
TALLY/CONTACT selector
If you select TALLY on the TALLY/CONTACT
selector, you can control the camera selected
by the switcher. If you select CONTACT on the
TALLY/CONTACT selector, you can operate the
camera selected by the RM-BR300 Remote
Control Unit. By selecting CONTACT (TALLY) on
the TALLY/CONTACT selector, you can control
the camera selected by the switcher and also
light the camera tally.
Improved functionality with the
RM-BR300/4
The following features can be achieved with the
RM-BR300/4 and after.
Model Name Destination Serial No.
RM-BR300/4 Remote Control Unit UC7 110001-
RM-BR300/4 Remote Control Unit J1 310001-
RM-BR300/4 Remote Control Unit CE3 410001-