Filter
Top Products
60
Installing the Camera in a High Position
4 Attach the attachment materials (not supplied)
to the ceiling bracket (B), and install the bracket
on the ceiling. Align the hole on the ceiling
bracket (B) in the direction where the front of the
camera will be positioned later.
5 Attach the wire rope to the materials near the
ceiling. Use an M5 (3/16 inch) hexagon socket
head cap screw (not supplied). Attach the wire
rope to an area independent of the area where
the ceiling bracket is attached.
6 Attach the wire rope to the ceiling bracket (A).
Pass the wire rope through the fixing hole and
attach its end to the attachment hole on the
bracket using the supplied one screw (3M4 × 8).
For attaching the wire rope to the bracket, use only
the supplied screw. Using another screw may
disable the function of the wire rope.
Caution
7 Insert the protrusions on the ceiling bracket (A)
into the spaces prepared in the ceiling bracket
(B) with the hole in the front of the ceiling
bracket (A) aligned with the hole on the ceiling
bracket (B), and temporarily attach them by
turning the ceiling bracket (A) with the camera
clockwise.
8 Secure the ceiling brackets (A) and (B) using
the supplied three screws (3M3 × 8).
hole
Ceiling
Ceiling bracket (B)
Attachment materials
Ceiling
Ceiling bracket (B)
Attachment materials
Wire rope (supplied)
M5 (3/16 inch)
hexagon socket head
cap screw
Ceiling bracket (A)
Fixing hole for wire rope
Wire rope (supplied)
M4 x 8 (supplied)
1
2
Ceiling
bracket (A)
Ceiling bracket (B)
Ceiling
Align.
Ceiling
M3 x 8
(supplied)