Filter
Top Products
59
Installing the Camera in a High Position
14
Installing the Camera in a High Position
Using the supplied ceiling brackets, wire rope and
screws, and the attachment materials (not supplied),
you can attach the camera to a ceiling or on a
shelf, etc. in a high position. When you install the
camera, always install it on a level ceiling or shelf,
etc. If you have to install it on an incline, make sure
that the inclination is within ± 15 degrees, so that
the pan/tilt performance is guaranteed.
• When you attach the camera to a ceiling or shelf,
etc. in a high position, entrust the installation to
an experienced contractor or installer.
• Attach the camera to the ceiling or shelf, etc.
firmly, after making sure the ceiling, shelf, etc. and
the attachment materials (not including the
supplied accessories) are strong enough to bear
a weight of 60 kg (132 lb 4 oz). If the ceiling or
shelf, etc. is not strong enough, the camera may
fall and cause serious injury.
• Be sure to attach the supplied wire rope to
prevent the camera from falling.
• Check periodically, at least once a year, to
ensure that the connection has not loosened. If
conditions warrant, make this periodic check
more frequently.
Caution
Before installation
After deciding the shooting direction, make the
required holes for the ceiling bracket (B) and
connecting cables on the ceiling or shelf, etc. For
the dimensions of the ceiling bracket (B), see
page 42.
• The connecting cables cannot be passed through
the ceiling bracket (A). A hole for the wiring is
required in the ceiling or on a shelf, etc. behind
where the camera is to be installed.
• Do not attach any object other than the camera to
the ceiling brackets.
• The ceiling bracket cannot be attached to the
junction box when installing the camera on a
ceiling.
Note
Installation on a ceiling (example)
1 Set IMG-FLIP to ON in the SYSTEM menu.
2 Remove the four screws on the bottom of the
camera to remove the four feet.
3 Attach the ceiling bracket (A) to the bottom of
the camera using the supplied four screws (3M3
× 8). Position the a hole for screwing on the
ceiling bracket (A) to the front of the camera as
illustrated, align the screw holes on the ceiling
bracket with those on the bottom of the camera,
then attach the bracket to the camera.
For attaching the camera to the ceiling bracket, use
only the supplied screws. Using other screws may
damage the camera.
Note
Ceiling
bracket (A)
M3 x 8 (supplied)
Front of
camera