Sony BRC-300P Camcorder User Manual


 
53
Techinical Appendix
13.6 Sync Lock Setting
In order to match output signal timing to the input signal, the Sync Master setting is required on the Main
menu. To achieve this, select Menu, System, and then Sync Master.
BRC-H700
Output signal to be matched with input signal
When using HFBK-HD1 [ HD1 ]
When using HFBK-SD1 [ SD1 ]
Output from main unit BRC-H700 [ STD ]
BRC-Z700
When HD output signal from BRC-Z700 main unit
[STD [HD]]
When SD output signal from BRC-Z700 main unit
[STD [SD]]
13.5 Recommended Lighting Conditions
13.7 Audio Configuration
The BRC-H700: brighter than 400 lx
The BRC-Z700: brighter than 450 lx
The BRC-Z330: brighter than 450 lx
The BRC-300/300P: brighter than 600 lx
The BRC-H700 and BRC-Z700 have three and two audio configurations, respectively. In the first configuration
with the HFBK-TS1 (illustrated below), you can mix audio signals and video signals and output them as HDV.
In the second configuration, you can input the audio signal to the BRBK-H700 or the BRBK-MF1 and transmit
it via an optical fiber cable. The output signal from the BRU-H700 is an analog audio signal and a selected
video signal generated from a compatible optional video card. The third configuration adds even more
convenience, allowing you to input the output signal to the HFBK-TS1. As a result, you can output the final
data as HDV.
When connecting with BRU-H700
Output signal from BRU-H700 [STD [HD]]
When using HFBK-HD1 with BRU-H700 [ HD1 ]
When using HFBK-SD1 with BRU-H700 [SD1]
BRC-Z330
When HD output signal from BRC-Z330 main unit
[STD [HD]]
When SD output signal from BRC-Z330 main unit
[STD [SD]]
(1) The BRC-H700
Audio in
Audio in
Audio out
HFBK-TS1
(HDV Card)
i LINK (HDV)
Audio&Video
(Audio delay is adjustable)
i LINK (HDV)
Audio&Video
(Audio delay is
adjustable)
(2) The BRC-H700/
BRC-Z700
BRBK-H700 for BRBK-H700
BRBK-MF1 for BRC-Z700
HD optical multiplex card
BRU-H700
Optical fiber cable
Audio in
Audio in
Audio out
(3) The BRC-H700/
BRC-Z700
BRBK-H700 for BRBK-H700
BRBK-MF1 for BRC-Z700
HD optical multiplex card
BRU-H700
Optical fiber cable