Filter
Top Products
2-15
HDW-F900 P1E2
DPR-227 board
Heat pipe unit
Clamper
CN-2044
board
CN-2078 board
SV-218 board
SY-285 board
IF-819
board
2-5-4. IF-819, SV-218, SY-285 Boards
Removal
1. Open the inside panel. (Refer to Section 2-1.)
2. Draw out the CN-2044 and CN-2078 boards in the
arrow direction.
3. Draw out the IF-819, SV-218 and SY-285 boards.
Installation
Install in the reverse order of removal.
n
When installing the relay boards (CN-2044 and CN-2078),
align the connector position and insert them carefully and
securely.
2-5. Plug-in Board Removal and Installation
3. Release the clamper retaining the heat pipe unit in the
arrow direction.
4. Draw carefully out the DPR-227 board while lifting up
the heat pipe unit.
Installation
1. Insert the DPR-227 board with the heat pipe unit lifted
up.
2. Reinstall the heat pipe unit, and install the clamper.
3. Align the connector position and insert the CN-1940
and CN-2085 boards carefully and securely.
4. Close the inside panel. (Refer to Section 2-1.)