Filter
Top Products
4-18
HDW-F900 P1E2
KNEE page
Item Setting Description
POINT _99 to 99 Sets the knee point level when the settings of the auto knee function
R/G/B/M of the R, G, B and master are OFF.
SLOPE _99 to 99 Sets the knee slope level when the settings of the auto knee function
R/G/B/M of the R, G, B and master are OFF.
WHT CLP _99 to 99 Sets the white clip level of the R, G, B and master.
R/G/B/M
KNEE ON, OFF Sets the knee correction circuit to ON or OFF.
KNEE SAT ON, OFF Sets the knee saturation function to ON or OFF.
WHT CLIP ON, OFF Sets the white clip function to ON or OFF.
TEST OFF, 1, 2 Selects the test signal.
OFF : Provides no test signals.
1 : Provides the test signal of the sawtooth waveform.
2 : Provides the test signal of the sawtooth waveform of digital
output.
ABS Press the rotary Sets the ABS mode to ON or OFF.
encoder to execute To turn on the ABS mode
the operation. Press the rotary encoder to display the ABS in reverse video.
When the ABS mode setting is ON, display the numbers of KNEE
POINT R, G, B and KNEE SLOPE R, G, B in reverse video, and be able
to confirm the absolute values.
To turn off the ABS mode
Press the rotary encoder again.
4-6. PAINT Menu
<KNEE>
[R] [G] [B] [M]
POINT : 0 0 0 0
SLOPE : 0 0 0 0
WHT CLP: 0 0 0 0
KNEE : ON
KNEE SAT: OFF
WHT CLIP: ON
TEST : OFF ABS
(Display is initial values.)