Filter
Top Products
4-19
HDW-F900 P1E2
DETAIL 1 page
Item Setting Description
LEVEL _99 to 99 Sets the general level of the detail signal.
LIMITER _99 to 99 Sets the level for clipping the excessive detail signal.
M/WHT/BLK
CRISP _99 to 99 Sets the level for suppressing the noise components contained in the
detail signal.
HV RATIO _99 to 99 Sets the ratio between H detail signal and V detail signal.
FREQ _99 to 99 Sets the frequency of the H detail signal.
LVL DEP _99 to 99 Sets the level for suppressing the detail amount in the dark part.
DETAIL ON, OFF Sets the function for attaching the detail signal for improving the
resolution to ON or OFF.
LVL DEP ON, OFF Sets the level depend function to ON or OFF.
ABS Press the rotary Sets the ABS mode to ON or OFF.
encoder to execute To turn on the ABS mode
the operation. Press the rotary encoder to display the ABS in reverse video.
When the ABS mode setting is ON, display the numbers except
LIMITER M in reverse video, and be able to confirm the absolute
values.
To turn off the ABS mode
Press the rotary encoder again.subject.
4-6. PAINT Menu
<DETAIL 1>
[M] [WHT][BLK]
LEVEL : 0
LIMITER : 0 0 0
CRISP : 0
HV RATIO : 0
FREQ : 0
LVL DEP : 0
DETAIL : ON
LVL DEP : OFF ABS
(Display is initial values.)