Filter
Top Products
5-16
HDW-F900 P1E2
56432
1
Setting
VF
screen
indicates the auto iris window frame.
Others
item OPERATOR REFERENCE SCENE OHB LENS STANDARD
(*11)
Power is Factory
turned ON set
AUTO IRIS __ __ _ ON
(*3)
ON
IRIS CLOSE __ ____ OFF
(*3)
OFF
DIGITAL GAIN
(*7)
_ __ REF _ OFF
MSU connected only
item OPERATOR REFERENCE SCENE OHB LENS STANDARD
(*11)
Power is Factory
turned ON set
V DTL CREATION MODE _ __ REF _ MAX
V DTL CONTROL MODE _ ___ REF _ ON
KNEE MAX _ OFF __ OFF OFF OFF
AUTO KNEE POINT _ ___ REF _ 0
WHITE SETUP MODE __ ____ _AWB
shows an analog item which will not be indicated as 0 after being stored.
O shows an analog item which will be indicated as 0 after being stored.
shows a switch which will be stored in the select item.
REF returns the status to the one when stored in the reference file.
OHB returns the status to the one when stored in the OHB file.
If mentioned as ON or OFF, the values will be same as ON or OFF.
If mentioned as _, the value does not change.
(*1): In SKIN DETAIL GATE 1/2/3, one among 1, 2 and 3 is to be set ON.
(*2): When using an electromotive filter
(*3): Only when using standalone
(*4): WHITE value stored is used when the extender ON.
(*5): The state depends on the one of the external switch when the standalone state.
(*6): When connecting to the MSU (master setup unit), the memory enters the temporally released state. As PRESET
brings WHITE R/G/B to 0, regardless of the factory setting value of 3200K, if changing WHITE R/G/B and per-
forming REFERECE STORE, the specified value is recalled as PRESET.
(*7): DIGITAL GAIN state is stored when being allocated to ASSIGNABLE 1 or 2.
(*8): When WHITE SETUP MODE setting is ABW, the value when selecting AWB is returned and when selecting
AUTO LEVEL, 0 is returned.
(*9):
(*10): Refer to Section 4,“ Setup Menu”.
(*11): Shows items to be called when [STANDARD] is executed, that is the reference file is called.
(*12): When a optional HKDW-902 (Image Inverter Board) is installed, this item become effective.
5-8. File items