Filter
Top Products
4-15
HDW-F900 P1E2
<GAMMA>
[R] [G] [B] [M]
LEVEL : 0 0 0 0
COARSE : 0.45
TABLE : STANDARD
: 4
GAMMA : ON
TEST : OFF
ABS
(Display is initial values.)
GAMMA page
Item Setting Description
LEVEL _99 to 99 Adjusts the gamma correction curve of the R, G, B and master.
COARSE 0.40, 0.45, 0.50 Sets the correction curve of the master gamma in steps.
TABLE STANDARD Selects the gamma table.
USER
*
STANDARD : Select the standard gamma table which comes standard
on the unit.
USER : Selects the user gamma table. (Selectable from 5 files.)
1, 2, 3, 4, 5, 6 When STANDARD is selected:
1: INITIAL GAIN 3.5 (equivalent to ENG camcorder)
2: INITIAL GAIN 4.0 LOW (equivalent to EFP camera)
3: INITIAL GAIN 4.0 HIGH (equivalent to EFP camera)
4: INITIAL GAIN 4.0 (equivalent to SMPT-240M)
5: INITIAL GAIN 4.5 (equivalent to ITU-709)
6: INITIAL GAIN 5.0
GAMMA ON, OFF Sets the gamma correction function to ON or OFF.
TEST OFF, 1, 2 Selects the test signal.
OFF : Provides no test signals.
1 : Provides the test signal of the sawtooth waveform.
2 :
Provides the test signal of the sawtooth waveform of digital output.
ABS Press the rotary Sets the ABS mode to ON or OFF.
encoder to execute To turn on the ABS mode
the operation. Press the rotary encoder to display the ABS in reverse video.
When the ABS mode setting is ON, display the numbers of LEVEL in
reverse video, and be able to confirm the absolute values.
To turn off the ABS mode
Press the rotary encoder again.
*: User gamma table is the file that the customers make according to their needs. The gamma or knee may be set to the fixed value
forcibly when the file is made. In this case, the both or either of gamma and knee controls shown below become disabled.
Gamma
. GAMMA page of the PAINT menu
Item : LEVEL, COARSE, GAMMA
Knee
. KNEE page of the PAINT menu
Item : POINT, SLOPE, KNEE
. External switch
AUTO KNEE (OUTPUT/DCC) switch
4-6. PAINT Menu