Filter
Top Products
4-25
HDW-F900 P1E2
SCENE FILE page
Item Setting Description
1 Saves and calls the scene file (the data painted in accordance with the
2 shooting scene.) (Same as the SCENE FILE page in the FILE menu.)
3 How to save
4 1. Set “→” to STORE and press the rotary encoder, then “STORE NO?”
5 will blink.
STORE 2. Select the file No. (1 to 5) for saving.
(If data is already saved, the data will be replaced with new one.)
How to call
Set “→” to the file No. to be called up and press the rotary encoder.
During calling up, the number is highlighted, and to cancel the
operation, press the rotary encoder during the highlighting.
STANDARD Press the rotary Returns the current paint adjustment amount and switch settings to the
encoder to execute reference values.
the operation.
READ Press the rotary Reads the five scene files corresponding to the group number selected
(MS → CAM) encoder to execute by GP from the memory stick to the memory of the camcorder.
the operation.
WRITE Press the rotary Writes the five scene files stored in the memory of the camcorder to the
(CAM → MS) encoder to execute memory stick after being group-numbered by GP.
the operation.
GP 1 to 20 Used to select the scene file group number when the scene files are
saved to the memory stick or read from the memory stick.
(Corresponds the five scene files as one pair to each group.)
FILE ID Writes comments to a scene file to be stored to the memory stick.
(Applies for each scene file group.)
CAM CODE Only displays the model name of the scene file saved in the memory
stick.
DATE Only displays the date when the scene file was created in the memory
stick.
4-6. PAINT Menu
<SCENE FILE>
1 2 3 4 5 STORE
STANDARD
READ (MS CAM) GP: 1
WRITE(CAM MS)
FILE ID:
CAM CODE
DATE