Filter
Top Products
3-1
HDW-F900 P1E2
3-1. Error Code
WARNING INDICATORS
The warning indicators on the LCD display screen light when a fault occurs during the power-on-sequence
or normal operation.
RF : Lights when the video heads are clogged.
SERVO : Lights when the servo is out of control.
HUMID : Lights when condensation occurs on the head drum
SLACK : Lights when the tape is not wound properly or other problems occur.
ERROR CODES
When “SLACK” of the warning indicator lights, error causes and its operating status are displayed on the
display panel.
E-XXXX
MODE ERROR CAUSE
01 : REC 10 : Drum drive voltage abnormality 32 : No S reel FG detected
02 : REC PAUSE 11 : No drum FG detected 42 : No T reel FG detected
03 : THREAD 12 : No drum PG detected 61 : Excessive function cam rotation time in the
04 : UNTHREAD 20 : Capstan drive current abnormality forward direction
05 : STOP 21 : No capstan FG-A detected 68 : Threading motor voltage abnormality
08 : PLAY 22 : No capstan FG-B detected
09 :FF
0A : REW
0b : REC REVIEW
0C : CUE UP
0E : FF SEARCH
0F : REW SEARCH
OVER EMPH OVER
DIAG PB VITC NDF EXT-LK
V
H
TAPE
BATT
21
PEAK dB
EB
EF
RF SERVO HUMID SLACK
H MIN SEC FRM
0
20
10
30
∞
40
Error code
Warning indicators
LCD display screen
HOLD
Section 3
Error Code and Error Message