Filter
Top Products
4-5
HDW-F900 P1E2
4-5. OPERATION Menu
The OPERATION menu consists of the items that a camera operator can set when using this camera, such
as VF screen display setting.
VF DISPLAY page
In the VF DISPLAY page, the items to be displayed on the viewfinder screen can be selected and the
displaying method can also be set.
Item Setting Description
EX 3S, ON, OFF Sets the extender display.
a)
ZOOM 3S, ON, OFF Sets the zoom position display.
a)
ND 3S, ON, OFF Sets the ND filter display.
a)
CC 3S, ON, OFF Sets the CC filter display.
a)
IRIS 3S, ON, OFF Sets the iris value display.
a)
WHITE 3S, ON, OFF Sets the white balance memory display.
a)
D5600K 3S, ON, OFF Sets the D5600K mode display.
a)
GAIN 3S, ON, OFF Sets the gain value display.
a)
SHUTT 3S, ON, OFF Sets the shutter speed/mode/reading mode display.
a)
BATT 3S, ON, OFF Sets the power supply voltage display.
a)
TAPE 3S, ON, OFF Sets the tape remainder display.
a)
TC 3S, ON, OFF Sets the time code display.
a)
AUDIO 3S, ON, OFF Sets the audio level display.
a)
MESSAG ALL, WRN, AT, OFF Sets a message to be displayed at the center on the VF screen when
each setting is changed.
Message
Warning
b)
Auto setup
c)
Status
d)
ALL OO O
AT OO X
WRN OX X
OFF XX X
a) 3S: Displays for three seconds on the VF screen when a status is changed.
ON: Displays all the time.
OFF: Displays nothing.
b) Warning: Messages about the diagnosis information of the boards.
c) Auto setup: Message on auto setup.
d) Status: Message showing the status when the setting is changed with the switches on the front panel or the side panel.
4-5. OPERATION Menu
<VF DISPLAY>
EX : ON BATT : ON
ZOOM : OFF TAPE : ON
ND : ON TC : OFF
CC : ON AUDIO : OFF
IRIS : ON
WHITE : ON MESSAG: ALL
D5600K: ON
GAIN : ON
SHUTT : ON
(Display is initial values.)