Filter
Top Products
Error/Warning Indications
110
Appendices
Battery Error
Please Change Battery
An error was detected with the battery pack.
Replace the battery pack with a normal one.
Backup Battery End
Please Change
The remaining power of the backup battery is insufficient.
Replace the battery with a new one.
Unknown Media(A)
2)
Please Change
A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.
Media Error
Media(A)
2)
Needs to be
Restored
An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
Media Error
Cannot Record to
Media(A)
2)
Recording cannot be done, as the memory card is defective.
As playback may be possible, it is recommended to replace it
with another card after copying the clips, as required.
Media Error
Cannot Use Media(A)
2)
Neither recording nor playback can be done, as the memory
card is defective.
It cannot be operated with this camcorder. Replace it with
another card.
Will Switch Slots Soon This is an advanced notice that the camcorder will switch from
the current memory card to the other memory card for
continuous recording.
No Clip There are no clips in the memory card.
Check the selected card.
Cannot Use Media(A)
2)
Unsupported File System
A card of a different file system or an unformatted card was
inserted. It cannot be used with this camcorder.
Replace it with another card or format it with this camcorder.
Cannot Use Media(A)
2)
In UDF Mode
A memory card incompatible with UDF mode is inserted.
Replace the card from the respective slot, format it with the
camcorder, or switch to UDF FAT mode.
Same File Already Exists
Change Media(A)
2)
A clip with the same name exists in the memory card to which
you want to copy.
Replace the card from the respective slot with a different card.
Video Format Mismatch The external signal input via the i.LINK connection cannot be
recorded, as the “Format” setting is different from the signal
format of the external input signal.
Change “Format” in “System” in the OTHERS menu to match
it to that of the external signal.
Copy Protected Input
Cannot Record
The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.
Media Error
Playback Halted
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Media(A)
2)
Error
Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.
Media Reached
Rewriting Limit
Change Media (A)
2)
The memory card comes to the end of its service life. Make a
backup copy and replace the card with another one as soon as
possible. Recording/playback may not be performed properly
if you continue to use the card.
For details, refer to the operating instructions of the memory
card.
Warning indication
on LCD/EVF
Buzzer Tally
lamps
Cause and measures