Filter
Top Products
Operating the Camera
Using the Trigger Button
24
Using the Trigger Button
You can execute various functions by clicking their
respective buttons on the Trigger panel.
Sending a monitor image via e-mail
You can send a captured still image by attaching it to an
e-mail.
To use this function, you need to make e-Mail (SMTP)
active and set the address in the Trigger menu of the
Administrator menu properly (page 79).
1
Click e-Mail (SMTP) on the Trigger panel.
The still image of the moment you click is captured,
and your e-mail with the image file attached is sent
to the specified mail address.
Sending a monitor image to an FTP
server
You can send a captured still image to the FTP server.
To use this function, you need to make FTP active and
set the address in the Trigger menu of the Administrator
menu properly (page 79).
1
Click FTP client on the Trigger panel.
The still image of the moment you click is captured,
and the image file is sent to the FTP server.
Recording a camera image as a still
image
You can capture a camera image as a still picture and
record it.
The still images are recorded in the built-in memory or
CF memory card (not supplied).
To use this function, you need to make Image memory
active and set the details in the Trigger menu of the
Administrator menu (page 79).
1
Click Image memory on the Trigger panel.
The still image of the moment you click is captured,
and the image file is recorded.
Controlling alarm output 1, 2
You can control Alarm output 1, 2.
To use this function, you need to make Alarm output 1
or Alarm output 2 active in the Trigger menu of the
Administrator menu (page 80).
1
Click Alarm output1 or Alarm output2 on the
Trigger panel.
The alarm output is switched by clicking.
The alarm output mode can be selected from
Toggle or Timer of Alarm output 1, 2 in the
Trigger menu (page 80).
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.
Controlling the Day/Night function
You can set the Day/Night function to On (night mode)
and Off (day mode).
To use this function, you need to make Day/Night active
in the Trigger menu of the Administrator menu
(page 80).
1
Click Day/Night on the Trigger panel.
Each click switches the Day/Night function
alternately between On (night mode) and Off (day
mode).
Note
If Day/Night mode in the Trigger-Day/Night menu
(page 80) is set to Disable or Auto, you cannot control
the Day/Night function by clicking Day/Night.
Playing an audio file stored in the
camera
You can play an audio file previously stored in the
camera using the SNC audio upload tool.
To use this function, you need to make Voice alert1,
Voice alert2 and Voice alert3 active in the Trigger menu
of the Administrator menu (page 80).
1
Click Voice alert1, Voice alert2 or Voice alert3 on
the Trigger panel.
Playback of the selected audio file starts and the
playback sound is output from the speaker
connected to the camera.