Filter
Top Products
Administrating the Camera
Setting the Motion Detection/VMF Function — Motion detection Menu
83
Setting items for motion detection
Use the settings tab to set the conditions for the motion
detection function while observing camera images. This
menu is the same as the settings menu displayed when
you click Detection on Alarm transmission on the
e-Mail (SMTP) menu, or on Alarm recording on the
Image memory menu.
Preview screen
This screen is for monitoring images and configuring
active/inactive windows.
Note
The frames shown on the monitor screen are not
displayed on the image files sent or recorded with
motion detection.
Target of setting
Select the camera position subject to detection settings
and VMF settings from Current position or Preset.
If you select Items to configure, the Current Position
and Preset will be displayed. Selecting Preset will
display Restore preset.
Current position: Select this option to set the current
camera position as the subject of configuration.
Preset: Select this option to configure each preset.
Select a preset from the list and move the camera to
the preset position. The setting is enabled when the
camera has moved to the set preset position.
Current position
Preset
Notes
• Camera control can be used when the mode is
“Current position” mode.
• Detection settings and VMF settings should be saved
independently when the and Current position and
Preset is selected.
Detection settings
Detection area
Specify the effective scope of motion detection.
Configuring the detection area
The following procedure is used to configure the motion
detection area:
Active window Inactive window