Filter
Top Products
Administrating the Camera
Setting the Camera Image and Audio — Camera Menu
41
Tilt angle: -15° to +65°
Note
The privacy mask area is a rectangle that is specified
with respect to the center of the camera image. The
privacy mask may not be set in areas close to the end of
pan/tilt operation.
OK/Cancel
See “Buttons common to every menu” on page 29.
Day/Night Tab
Use this tab to set the day/night function of the camera.
Day/Night mode
Select the day/night mode from among four modes.
Auto: Normally works in day mode; switches
automatically to night mode in a dark place.
Note
The day/night mode is not switched to night mode
automatically when Exposure mode is set to Shutter
priority, Iris priority or Manual in the Picture tab.
Manual: Switch the day/night mode manually. When
you select Manual, On and Off become active.
When you select On, the camera works in night
mode. When you select Off, it works in day mode.
Timer: Normally the camera works in day mode. It
switches to night mode at the time you set in the
Schedule menu.
Click Schedule to display the setting menu for the
effective period. (“Setting the Schedule — Schedule
Menu” on page 81)
Sensor input: Controls the day/night mode by
synchronizing it with the sensor input. Select the
sensor input with which you want to synchronize the
mode: Sensor input 1, Sensor input 2, Sensor
input 3 or Sensor input 4.
While a sensor input is detected, the camera works in
night mode.
OK/Cancel
See “Buttons common to every menu” on page 29.
Video codec Tab
Use this tab to set the items for the video codec.
+65°
-15°