Filter
Top Products
15
Quick Start Guide
Recording a still image on a “Memory Stick” (p. 175)
Monitoring the playback still images on the LCD
screen (p. 211)
POWER
CAMERA
MEMORY/
NETWORK
VCR
OFF
(
CHG
)
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 30).
1Remove the lens cap.
3Press OPEN to open
the LCD panel.
The picture appears on
the screen.
Viewfinder
When the LCD panel is closed, use the viewfinder with your eye against the eyecup.
Adjust the viewfinder lens to your eyesight (p. 42).
2Set the POWER switch to
MEMORY/NETWORK
(DCR-TRV950E only)
while pressing the small
green button.
4
Pressing PHOTO
lightly.
You can start
recording when the
small green button on
the screen stops
flashing, and lights up.
5Press PHOTO
deeper.
The image while
pressing the button
deeply is recorded
on the “Memory
Stick.”
PLAY PB
POWER
CAMERA
MEMORY/
NETWORK
VCR
OFF
(
CHG
)
NOTE
Do not pick up your
camcorder by holding the
viewfinder, the flash, the LCD
panel or the battery pack.
1Set the POWER switch to
MEMORY/NETWORK
(DCR-TRV950E only)
or VCR while pressing the
small green button.
2Press PLAY or PB. The last recorded
image is displayed.
or