Sony DCR-TRV950E Camcorder User Manual


 
203
“Memory Stick” Operations / “Memory Stick” functies
Een bewegend beeld van
externe apparatuur opnemen
Alvorens de camcorder te bedienen
Zet DISPLAY onder in het instelmenu op
LCD. (De standaardinstelling is LCD.)
(1)Zet de POWER schakelaar in de VCR stand.
(2)Begin met afspelen van de opgenomen
cassette, of zet het TV-toestel aan om het
gewenste programma te bekijken.
Het beeld van de andere apparatuur
verschijnt op het scherm.
(3)Volg de procedure op pagina 201 vanaf stap 3
tot het punt waar u de opname wilt starten.
Gebruik van het A/V-aansluitsnoer
Als uw TV-toestel of videorecorder beschikt
over een S-video ingangsaansluiting
Beelden kunnen natuurgetrouwer worden
weergegeven met behulp van een S video-kabel
(los verkrijgbaar).
Bij deze wijze van aansluiten hoeft u de gele
(video) stekker van het audio/video-
aansluitsnoer niet aan te sluiten.
Verbind het S-VIDEO aansluitsnoer (los
verkrijgbaar) met de S video stekkerbussen van
uw camcorder en de TV of videorecorder.
Recording pictures from a tape as
a moving picture
Recording a moving picture
from external equipment
Before operation
Set DISPLAY in to LCD in the menu settings.
(The default setting is LCD.)
(1)Set the POWER switch to VCR.
(2)Play back the recorded tape, or turn the TV on
to see the desired programme.
The image of the other equipment is
displayed on the screen.
(3)Follow the procedure on page 201 from the
step 3 onwards at the point where you want
to start recording from.
Using the A/V connecting cable
If your TV or VCR has an S video jack
Pictures can be reproduced more faithfully by
using an S video cable (optional).
With this connection, you do not need to connect
the yellow (video) plug of the A/V connecting
cable.
Connect an S video cable (optional) to the S video
jacks of both your camcorder and the TV or VCR.
S VIDEO
VIDEO
OUT
AUDIO/
VIDEO
S VIDEO
AUDIO
: Signal flow/
Signaalverloop
VCR/
Videorecorder
Yellow/
Geel
White/
Wit
A/V connecting cable (supplied)/
A/V-kabel (meegeleverd)
Red/
Rood
Een beeld vanaf cassette
opnemen als bewegend beeld