Filter
Top Products
273
Customising Your Camcorder / Uw camcorder naar eigen inzicht aanpassen
Changing the default settings with the menu
Icon/item
VCR SET
HiFi SOUND
AUDIO MIX
A/VtDV OUT
NTSC PB
LCD/VF SET
LCD B.L.
LCD COLOUR
VF B.L.
GUIDEFRAME
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound (p. 313)
To play back a stereo tape with the left sound or a
dual sound tape with main sound
To play back a stereo tape with the right sound or a
dual sound track tape with sub sound
To adjust the balance between the stereo 1 and stereo
2 (p. 153)
To output digital images and sound in analog format
using your camcorder
To output analog images and sound in digital format
using your camcorder (p. 264)
To play back a tape recorded in the NTSC colour
system on a PAL system TV
To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
To set the brightness on the LCD screen to normal
To brighten the LCD screen
To adjust the colour on the LCD screen, turn the
SEL/PUSH EXEC dial.
To set the brightness on the viewfinder screen to
normal
To brighten the viewfinder screen
Does not display the guide frame.
Displays the guide frame (p. 83).
Mode
zSTEREO
1
2
——
zOFF
ON
zON PAL TV
NTSC 4.43
zBRT NORMAL
BRIGHT
——
zBRT NORMAL
BRIGHT
zOFF
ON
POWER
switch
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Notes on LCD B.L. and VF B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power supplies other than the battery pack, BRIGHT is automatically selected.
Even if you adjust LCD B.L., LCD COLOUR and/or VF B.L.
The recorded picture will not be affected.
(continued on the following page)
To get low-
intensity
To get high-
intensity
ST1 ST2