Filter
Top Products
6 © 2009 VBrick Systems, Inc.
These names will replace the generic names shown in the dropdown list at the top. For
example Destination 1 will be replaced by the given name of the destination. The Select Video
Rate
and Select Audio Rate dropdowns show only Video and Audio Rates1 and None in this
release. These fields can be used to transmit video only or audio only programs by setting
either video or audio to None.
Servers
There are three possible server configurations for a given stream. The configuration
parameters are divided into one common section (on the Programs page) and another section
(on the Servers page) which configures each individual server.
Getting Help
A link to the online help system is available from the Configuration Menu on the left side of
the VBAdmin page. This help system has a powerful full-text search engine that can quickly
find the information you need. You may wish to take a few minutes to familiarize yourself
with the help system. It can save time when tying to find information about appliance
parameters or options. When using VBAdmin, click on the question mark hyperlink in the
upper-right corner of each page to get context-sensitive help for that page.
Configuring Local Online Help
The online help system points to a VBrick web server and requires an Internet connection. In
some cases it may be preferable (and faster) to put the help files on your local web server. To
do this you need to edit two MIB variables using the Command Line Interface or a MIB
browser. You also need to copy the help files from the Product CD to your web server. (For
more about using the CLI, see the "Command Line Interface" chapter in the H.264 Appliance
Getting Started Guide.)
T To install the help files and point to a local server
1. Open the CLI using Telnet or HyperTerminal.
2. Begin an edit session and set the following VBrick parameters as shown below. When
done, apply and save the configuration as shown. Note that all commands are
case-sensitive.
3. Replace
web_server_ip_address with the complete path to the Default Web Site > Home
Directory on your local server.
SVAR vbrickEditName=
SVAR vbrickEditName=admin
SVAR vbrickSysConfigurableHelpLinksEnable=2
SVAR "vbrickSysConfigurableHelpLinksURL=http://<web_server_ip_address>
SVAR vbrickSysApplySet=2
SVAR vbrickSysSaveConfiguration=2
4. Insert the "H.264 Appliance Product CD" in your computer and open Windows
Explorer.
5. Right-click on the CD and select
Explore. Then copy and paste the folder
VBrick_H264Help into the path you specified in Step 3 above.