Filter
Top Products
50 © 2009 VBrick Systems, Inc.
Figure 8. Transmitters: Part 1 – Standard Settings
SDP File URL Click to play (open) or save the .sdp file. The .sdp file is
retrieved via the HTTP server on the appliance. Paste
this URL into a browser to launch the stream "out-of-
band" using the .sdp file.
The URL address for the .sdp file is based on the
program and transmitter number, for example:
http://
AAA.BBB.CCC.DDD/vbStreamXdY.sdp
where: X is the
program number,
Y is the transmitter number and
AAA.BBB.CCC.DDD is appliance IP address.
Choose Transmitter to Configure Select from dropdown list. The number of transmitters
is configured on the Program Configuration > Programs
page.
Enable Transmitter Use to individually disable a transmitter. Default =
Disabled. The transmitter must be enabled for streaming
to occur.
Transmitter Name Enter an optional user-friendly name that describes the
transmitter.
Select Video Rate Select from dropdown list: Video Rate1 or None.
Select Audio Rate Select from dropdown list: Audio Rate 1 or None.