Filter
Top Products
System Configuration
VBrick H.264 Appliance Admin Guide 21
External SSH Server Default = Enabled. SSH (Secure Shell) is a replacement for Telnet.
It allows data to pass between two networked devices using a
secure channel.
No Login For Viewer
Files
Default = Enabled. If enabled the VBrick will serve a transmitter's
SDP file without requiring a login with username and password.
This allows any device (players, decoders, etc.) to acquire the SDP
file directly from the appliance. If disabled you may need to
provide another method for delivering the SDP file to the
receiving device, such as copying the file to another server.
Remote Support Poll Default = Disabled. The default enables continuous polling
through the firewall. If desired, you can enable polling only when
you need to establish a remote connection. This will not reboot the
appliance.
Remote Support
Server
Default =
remote.vbrick.com. Use the default if a DNS server is
defined on the Network
page. If a DNS server is not defined, you
must enter an IP Address in this field. Contact Support Services
for details.
RTSP Server Port Default = 554. Sets the RTSP server port.
VBAdmin Server Port Specifies the listener port for management and HTTP
connections. Default = 80. When the remote VBAdmin user
(client) specifies the http syntax, the port value is generally
omitted. Typically port 80 is the default value used by browsers.
As a matter of consistency, the VBrick default VBAdmin Server
Port value is also defaulted to 80. To access a different HTTP
port, the remote VBAdmin client user would specify the URL as
follows:
http://IPaddress:port where IPaddress = VBrick IP
address or hostname, and port. This feature is often useful for a
system where HTTP is used to traverse firewalls. The VBAdmin
server port is moved to another location (for example 8080) and
the HTTP Tunneling port (or the Windows Media HTTP port) is
set to 80.
Secure VBAdmin
Server Port
Specifies the listener port for management and HTTPS
connections. Default = 443. When the remote VBAdmin user
(client) specifies the HTTPS syntax, the port value is generally
omitted. Typically port 443 is the default value used by browsers.
As a matter of consistency, the VBrick default Secure VBAdmin
Server Port value is also defaulted to 443. To access a different
HTTPS port, the remote VBAdmin client user would specify the
URL as follows:
https://IPaddress:port where IPaddress = VBrick
IP address or hostname, and port.
H.264 Tunneling Port Sets the port to be used to serve tunneled H.264 HTTP streams.
Default is 8080 but if you are streaming HTTP directly from a
VBrick via the Internet, it is common practice to change this to 80
and to set the VBAdmin server port to something other than 80.