Filter
Top Products
58 © 2009 VBrick Systems, Inc.
System Information
System Model Displays the hardware model number of the appliance.
Hardware Revision
XX-YY. XX = Hardware Revision. YY = CPU Revision.
Boot Revision Displays current boot revision.
OS Code Revision Displays current OS code revision.
Application Code Revision Displays the revision number of the application code running
on the appliance.
Current Operational Mode Indicates the current operational mode of the VBrick. The
following modes are supported:
• Run Mode – Normal operation.
• Diagnostics – User selected mode for running certain
VBrick diagnostics.
• Limited Run Mode – Limited operational mode (not
selectable). Normally occurs if a hardware problem exists
within the VBrick but it can still partially operate.
• Overloaded Mode – Limited operational mode (not
selectable). This mode occurs when the VBrick is
configured to handle more video than its operational
capacity. If this occurs, the VBrick needs to be
reconfigured to reduce the number of streams and/or data
rates. Under this condition, the appliance temporarily
reduces video traffic in order to maintain VBAdmin
functionality.
Temperature Displays the appliance temperature in Celsius (for example 50º
Celsius = 122º Fahrenheit). A temperature exceeding 72º C
will cause an alarm, a trap, and a log message; if the
temperature drops below 70° C the alarm and trap will clear.
When the temperature exceeds the maximum threshold, the
appliance will reboot and come up in Limited Run Mode
;
when the temperature drops to an acceptable level, the
appliance will reboot and come up in normal Run Mode. The
temperature determines the fan speed as follows:
• If temperature > 50º C then fan speed = High.
• If temperature > 30º C then fan speed = Medium.
• If temperature < 30º C then fan speed = Low.
Fan Status On, Off, Alarm.
Slot ID Blade Server only. Indicates slot number of blade in server
chassis. Blades are numbered 1–11 from left to right.
Overloaded Count Provides a count of the number of times the box has entered
the Overloaded Mode.
CPU Utilization (%) Shows average CPU utilization over the previous 10 seconds.
System Up Time Total up time since last power cycle.
Total System Up Time Aggregate up time since customer delivery.