Filter
Top Products
62 © 2009 VBrick Systems, Inc.
Video Rate1
Audio
Audio Rate1
System Logs
System logs can give you more information about the status of your appliance. Each log can
hold up to 20 of the latest informational messages. All logs are emptied when the appliance is
powered down or reset.
Detected Video Format SDI or HDMI only. Indicates what is actually connected. This is
useful for determining configuration mismatches.
Actual Bit Rate Measured rate in bits per second of the encoded video stream being
created by the appliance.
Actual Frames per
Second
Measured rate in frames per second of the encoded video stream
being created by the appliance. This rate is rounded down and may
indicate 0 for frame rates less than 1 per second.
Total Frames Total video frames received from connected video source.
Frames Processed Total video frames encoded and streamed by the appliance.
Buffer Full Count Increments when the appliance is in an overloaded condition. Reduce
the load by lowering bit rates or reducing the number of RTSP and/or
HTTP clients.
How is Audio Connected Shows audio connection type from Audio/Video
Configuration > Audio page.
Audio State Only audio from SDI or HDMI inputs can be monitored.
Audio from the Main or Aux inputs is not monitored and will
not generate an alarm.
• Running – no audio problems detected.
• Digital Audio Input Problem – audio connection is not
OK.
Detected Audio Frequency Indicates the actual audio frequency. This field is shown only
for HDMI input configured with digital audio.
Actual Bit Rate Measured rate in bits per second of the encoded audio stream being
created by the appliance.
Total Frames Total audio frames received from connected video source.
Frames Processed Total audio frames encoded and streamed by the appliance.
Buffer Full Count Increments when the appliance is in an overloaded condition. Reduce
the load by lowering bit rates or reducing the number of RTSP and/or
HTTP clients.