Filter
Top Products
System Configuration
VBrick H.264 Appliance Admin Guide 23
Event Triggering
You can create and run scripts to activate certain functions on a VBrick appliance. There are
two ways to run scripts on an appliance. (1) You can run scripts for test purposes using the
Log Time Zone Determines the time zone where the unit is located. The time which
is included in the logged event displays time in this format.
Trap Log Local Stores logs locally within the unit. The log file will wrap after 20
events.
Trap Log Remote Sends log file to an external server.
General Config Log
Local
Stores the log of user initiated configuration changes traps locally
within the unit. The log file will wrap after 20 events.
General Config Log
Remote
Sends the log of user initiated configuration changes to an external
server.
Script Config
Log Local
Stores the log of script generated configuration changes locally
within the unit. The log file will wrap after 20 events.
Script Config
Log Remote
Sends the log of the log of script generated configuration changes to
an external server.
System Event Log
Local
Stores the log of system events locally within the unit. The log file
will wrap after 20 events.
System Event Log
Remote
Logs systems events to an external server.
Remote Event Log
Destination
Unicast IP address of remote event log server.