Filter
Top Products
20 © 2009 VBrick Systems, Inc.
Security
Note If you disable Telnet, FTP, VBAdmin, the Front Panel, and SNMP, the only way to
manage (and re-enable) these parameters is to connect a PC to the appliance with a
serial cable and use the Command Line Interface. You should never disable all the
network management interfaces if you are using the COM port for serial passthrough.
External Telnet Server Default = Enabled. Disabled will prevent Telnet sessions to the
VBrick appliance.
External FTP Server Default = Enabled. Disabled will prevent FTP sessions to the
VBrick appliance. Note that this feature must be enabled to
upgrade the appliance firmware using VBDownload.
External VBAdmin • Enabled – Default. Lets you manage the appliance from a web
browser using the VBAdmin management application.
Supports HTTP or HTTPS.
• Disabled – Prevents you from managing the appliance using
VBAdmin.
• HTTPS Only – Encrypts and secures the VBAdmin pages
using HTTPS.
External SNMP Default = Enabled. Disabled will prevent you from using an
external MIB browser to view or write parameters.
External SNMPv1
and SNMPv2 Access
Default = Enabled. You can use both SNMP v1/v2, and v3. For
tightest security, set parameter to Disabled and use SNMPv3 only.