Filter
Top Products
System Configuration
VBrick H.264 Appliance Admin Guide 11
System Time
System Mode
System Reset
Front Panel
The parameters shown here are used to configure the appearance and behavior of the front
panel. Access to front panel Configuration Mode is restricted by Pin number. Pin numbers
(default = 0000) are defined on the Usernames & Passwords page. Some VBrick H.264
appliance models have a front panel without keypad buttons or an LCD screen. If you have
one of these devices, the front panel configuration parameters shown below are not displayed.
For a description of how to actually use the front panel, see the "Front Panel" topic in the
H.264 Appliance Getting Started Guide.
System Date Time
Sets system date and time in
mm/dd/yyyy hh:mm format. The
appliance will reset when you click Set Time.
Time Zone Select from list: (GMT-12) Eniwetok – (GMT +12) Auckland.
Daylight Saving Time U.S. only. Check this box and the appliance will automatically adjust
for Daylight Savings Time. This is particularly useful when
monitoring the System Logs.
Operational Mode Indicates the configured operational mode of the appliance. The
following modes are supported:
• Run Mode – Normal operation.
• Diagnostics – User selected mode for running certain VBrick
diagnostics. See Troubleshoot on page 69.
Reset Resets (i.e. reboots) the appliance. A reset does not change, save, or
reset any configuration parameters.