Filter
Top Products
3
Chapter 3 Recording and Playback 3-47
4 Turn the MENU knob to move the t mark to PRE-LIGHTING.
5 Push the MENU knob.
The t mark at the left of PRE-LIGHTING changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
6 Turn the MENU knob clockwise or counterclockwise until the
desired time interval to turn on the light before recording starts
appears.
If you turn the MENU knob clockwise or counterclockwise, the
PRE-LIGHTING time changes in the following sequence: OFF y
2SEC y 5SEC y 10SEC.
Notes
• To turn on the light automatically before recording starts by
setting the PRE-LIGHTING item to ON, be sure to set the LIGHT
switch to AUTO. Also, set the switch of the light connected to the
LIGHT connector to ON.
The light automatically turns on and off in the continuous trigger
mode of the Manual Interval Rec mode. However, if the duration
when the light should be off is less than 5 seconds, the light is on
continuously.
(Continued)