Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-30
3 Adjust the LEVEL controls corresponding to the channel selected in
step 1 so that at the maximum sound level, the level meter indicates
-18 dB (segment above 20 segment). The second bar from the top
may turn on occasionally, but do not allow the top bar to go on. If it
goes on, the audio level is too high.
Using the LEVEL (CH-1/CH-2) controls
You can select the audio level controls to be used for adjusting the level
of the audio signals input to the AUDIO IN CH-1/CH-2 connectors on
the VTR MODE-2 page of the MAINTENANCE menu.
At the factory
setting Example 1 Example 2
Audio level
to the CH-1
Audio level
to the CH-2
Corresponding peak value
Off
These bars go on.
Normal input level
Those bars go on.
Excessive input level
LEVEL (CH-1)
control
LEVEL (CH-2)
control
MIC LEVEL
control
MIC LEVEL
control
The MIC LEVEL control is
linked with LEVEL (CH-1)
control
The MIC LEVEL control is
linked with LEVEL (CH-2)
control