Filter
Top Products
Chapter 2 Locations and Functions of Parts and Controls2-18
2
Shooting and recording/playback functions (2)
qf FILTER selector
This selector is a dual knob that selects the most appropriate filter to
match the light source illuminating the subject. The outer knob selects
the color temperature of the CC (Color Conversion) filter, and the inner
knob selects the type of ND (Neutral Density) filter. The white balance is
stored in memory for each CC filter.
Note that if the display mode is set to 3, when this selector is adjusted,
the new setting will be indicated on the viewfinder screen for about 3
seconds. (e.g.: FILTER: 3)
For detailed information on the display mode, see “4-7-3 Display Mode and
Setting Change and Adjustment Progress Messages” on page 4-73.