Filter
Top Products
Chapter 5 Setting Up the Camcorder
5
5-26
Back of camcorder
Adjustment screws
BETACAM
holder kit
WRR tuner fitting
Holes
Fitting the WRR-860A (Using a Battery Pack)
1 (1) Attach the WRR tuner fitting (not supplied, service part number:
A-8278-057-A) to the back of the camcorder.
1 Pass a screwdriver through the holes and tighten the screws.
2 Loosen the adjustment screws.
3 Adjust the tuner fitting position for a BP-L60A/M50/M100
Battery Pack to be attached, and tighten the adjustment
screws to fix its position.
4 Attach the BETACAM holder kit supplied with the tuner.
(2) Attach the battery pack.
For more information about attaching the BP-L60A/M50/M100 Battery Pack,
see “5-1-1 Using a Battery Pack” on page 5-1.
BP-L60A/M50/
M100